Building Components Prefabricated - FSC 5670

AAMA1002.10 - Insulating Storm Products For Windows And Sliding Glass Doors

Aluminum Insulating storm products covered in this specification are units to be used on the exterior of and interior of and in tandem with prime windows and sliding glass doors to improve interior climate control.

AAMA101 - Aluminum And Poly (Vinyl Chloride) (Pvc) Prime Windows And Glass Doors

This voluntary specification covers requirements for single and dual prime windows and glass doors for new construction and replacement.

AAMA1102.7 - Aluminum Storm Doors For Voluntary Specifications

Aluminum storm doors covered in this voluntary specification are units to be used on the exterior of and in tandem with prime doors to improve interior climate control. Their use singly, or as prime doors, is not recommended.

AAMA1302.5 - Aluminum Prime Windows, Forced-Entry Resistant

These test procedures cover the determiniation of the ability of windows and sliding glass doors, including the locking devices provided them, to comply with AAMA1302, "Specifications for Forced-Entry Resistant Aluminum Sliding Glass Doors", respectively.

AAMA1503.1 - Doors, Windows, Thermal, Transmittance And Condensation Resistance, Of Glazed Walled Sections Voluntary Test Method For 1988

AAMA501 - Walls, Metal Curtain, Methods Of Test For

These methods establish the procedures for evaluating performance of exterior metal walls under laboratory conditions.

AAMA601.1 - Aluminum, Painted, Extrusions And Curtain Wall Panels, Voluntary Guide Specification For Cleaning And Maintenance Of

AAMA609.1 - Aluminum, Architectural Anodized, Cleaning And Maintenance Of

This guide specification outlines methods, equipment and materials applicable for cleaning anodized aluminum after construction and for subsequent periodic maintenance.

AAMA-CW10 - Aluminum, Architectural, From Shop To Site, Care And Handling Of

BHMA-A156.10 - Doors, Pedestrian, Power Operated, American National Standard For

Requirements for this Standard apply to power operated swinging and sliding door for pedestrian use and some small vechicular traffic.

MIL-F-17298 - Flashing, Metal, Prefabricated Metal Building Flues

MIL-F-28602 - Flashing, Roof Vent, Adjustable

MIL-G-18014 - Gratings, Metal, Bar Type Flooring, Naval Shipboard

This specification covers open, bar-type gratings, (flooring), for shipboard use.

MIL-G-18015 - Grating, Metal, Other Than Bar Type (Shipboard Use)

This specification covers aluminum and steel floor gratings other than bar types for shipboard use.

MIL-L-18145 - Louver, Metal, Exhaust Opening-Gravity Closing Type

MIL-P-28680 - Pipe, Downspout, Elbow, Pipe, Eavetrough And Eavetrough Fittings

MIL-T-2738 - Tread, Metallic, Nonskid (Use Rr-T-650)

NAAMM-A202.1 - Grating, Metal Bar Manual, Standard Specification For

NFPA252 - Fire Tests Of Door Assemblies

These methods of fire test are applicable to door assemblies of various materials and types of construction used in wall openings to retard the passage of fire.

RR-D-575 - Door, Metal, Sliding And Swinging, Door Frame, Metal (Flush And Semiflush) (S/S By Sdi-100, 111, 113, 114, 116 And 119)

RR-G-1602 - Grating, Metal, Other Than Bar Type (Floor, Except For Naval Vessels)

RR-G-661 - Grating, Metal, Bar Type (Floor, Except For Naval Vessels)

RR-P-1352 - Partitions, Toilet, Complete (S/S By A-A-60003)

RR-T-650 - Treads, Metallic And Nonmetallic, Skid-Resistant

RR-T-661 - Treads, Safety, Metallic (S/S By Rr-T-650)

SDI100 - Steel Door & Frame, Recommended Specifications Standard

This specification for swinging steel doors and frames offers a number of choices in both regular and fire door and frame construction and design.

SDI105 - Frames, Steel, Recommended Erection Instruction For

SDI107 - Doors, Steel, Hardware On (Reinforcement-Application)

The information contained herein pertains to doors and frames manufactured in accordance with "Recommended Specifications-Standard Steel Doors and Frames", SD!100, published by the Steel Door Institute.

SDI111 - Doors, Steel, Frames, Details, Recommended Standard

The standard is a guide to help architects understand the breadth of the details available from standard steel door frame manufacturers.

SDI111 - Doors, Dutch, Recommended Standard

SDI111 - Doors, Steel, Standard, Recommended Louver Details For

SDI111 - Doors And Frames, Standard, Steel, Recommended Door, Frame And Hardware Schedule For

The purpose of this publication is to establish a guide for architects anf those responsible for scheduling doors, frames,and hardware requirements.

SDI111 - Doors And Frames, Standard, Steel, Recommended Weatherstripping For

SDI111 - Doors And Frames, Standard, Steel, Recommended Completed Opening Anchors (N0 S/S Document)

This standard is a guide to architects to help them recognize the available options to t he traditional sub buck detail widely used in the past.

SDI111 - Doors And Frames, Standard, Steel, Recommended Standard Preparation For Double Type (Interconnected) Locks On

SDI113 - Door, Steel, & Frame Assemblies, Apparent Thermal Performance Of, Test Procedure & Acceptance Criteria For

The purpose of this procedure shall be to establish a minimum standard and a method of test for the thermal effectiveness of steel door and frame assemblies under circumstances that might reasonable be considered normal field applications and conditons.

SDI114 - Doors And Frame Assemblies, Steel, Test Procedure And Acceptance Criteria For Acoustical Performance For

The purpose of this procedure shall be to establish minimum standards and methods of testing and effectiveness of steel door and frame assemblies under circumstances that might be considered normal field applications and conditions to insure the specifying agency has a common reference point upon which to base their door specifications.

SDI116 - Doors And Frame Assemblies, Steel, Standard Test Procedure And Acceptance Criteria For Rate Of Air Flow Through Closed

This specification covers the methods and procedures for testing to determine the rate of airflow through closed steel doors and frame assemblies under circumstances similar to normal field applications and conditions.

SDI119 - Door Frame And Frame Anchor, Steel, Performance Test Procedures For

The primary purpose of this Procedure shall be to establish a standard method of testing the effectiveness of steel frames and frame anchors under conditions that might reasonable be considered an accelerated field operating condition.

SS-S-110 - Screen, Window, Metal (Aluminum Tubular Frame, And Tension)

SWI-SW - Window, Steel - Jun 1989

UL10 - Doors, Fire, Tin Clad

These requirements cover the design and construction details of tin-clad fire doors which when so fabricated have demonstrated in fire tests conducted in accordance with the Standard for Fire Tests of Door Assemblies, UL 10B, fire performance properties which warrant their use as fire doors having a rating of 3, 1-1/2, or 3/4 hour.

UL10 - Door Assemblies, Fire Tests Of

These methods of fire tests are applicable to door assemblies of various materials and types of construction for use in wall openings to retard the passage of fire.

UL14 - Doors, Fire, Sliding Hardware For Standard Horizontally Mounted Tin - Clad

These requirements apply to hardware for horizontally sliding fire doors which have demonstrated in fire tests fire-resistive properties warranting their use with two-ply and three-ply tin-clad fire doors tested in accordance with the Standard for Fire Tests of Door Assemblies, UL 10B (ASTM-E152, NFPA No. 252).

UL14 - Doors, Fire, Tin-Clad, Mounted Singly And In Pairs, Swinging Hardware For Standard

These requirements apply to hardware for swinging fire doors which have demonstrated in fire tests fire-resistive properties warranting their use with two-ply and three-ply tin-clad fire doors tested in accordance with the Standard for Fire Tests of Door Assemblies, UL 10B (ASTM-E152, NFPA No 252).

UL9 - Window Assemblies, Fire Test Of

These methods of fire tests are applicable to window assemblies, including glass block and other light transmitting assemblies, for use in wall openings to retard the passage of fire.